| DC-60C Spindle Technical Data Sheet | ||||
| Application of Industry | Engraving Glass/Acrylic | |||
| Spindle Type | DC-60C | Rated frequency (Hz) | 167～1000 | |
| Rated speed (rpm) | 10000～60000 | Rated voltage (V) | 33～200 | |
| Maximum current (A) | 5 | Power (Kw) | 1.5（max） | |
| 1 | Cone Run-out(μm) | 1.27（max） | ||
| 2 | Cylinder working pressure（kg f/cm2） | 5.6-6.0 | ||
| 3 | Method of Tool Change | Automatic | ||
| 4 | Collet torque（N·cm） | ≥254 (Φ6) | ||
| 5 | Static deflection at shaft end (μm) | ≤2.0 | ||
| 6 | Dynamic deflection at shaft end (μm) | ≤8.0 | ||
| 7 | Vibration（mm/s） | ≤1.0 | ||
| 8 | Diameter of the mounting diameter（mm） | Φ61.902～61.91 | ||
| 9 | Cooling system water flow rate（L/min） | Water：≥1.6，Oil：≥3.0 | ||
| 10 | Cooling system water pressure（kg f/cm2） | Water：≥2.5，Oil：≥4.0 | ||
| 11 | Motor winding insulation resistance（MΩ） | ≥500（grade H） | ||
| 12 | Motor winding voltage test（V/M） | 1500V/1 Min | ||
| 13 | Noise value（dBA） | ≤72 | ||
| 14 | Spindle dust blowing pressure（kg f/cm2） | 2.5～3.0 | ||
| 15 | Spindle blowing dust gas flow（L/min） | ≥60 | ||
ATC, Polishing, Spindle Motor
ATC Polishing Glass Motorized Spindle
You must be logged in to post a review.
Reviews
There are no reviews yet.